Onyx- Graphene Oxide Coating

Onyx is formulated with concentrated graphene-oxide, our low odor graphene infused ceramic resin. This revolutionary formula is easier to install than any other ceramic coating on the market, provides immediate slickness, dazzling gloss and a durable, hydrophobic, self-cleaning finish. Our Onyx Graphene Coating sustains >110° contact angles for more washes than a ceramic coating with a lower sliding angle. The result is the best self-cleaning surface you have ever experienced with additional protection against water spotting.

Shake well before use. Apply numerous drops of product from the dripper bottle to our Auto Envy Dual Coating applicator. Apply the coating to
a 3×3 ft area of the vehicle using a cross-hatch pattern with slight overlap to level the product. Allow the coating to rainbow/flash before gently
removing excess product using a pearl style microfiber towel to level the coating. Do NOT allow coating to come in contact with water for 48 hours while
curing – if it does, remove water immediately. Apply additional coats with at least one hour between applications. Do NOT apply in direct sunlight or to a hot
surface. Cure time is dependent on environmental conditions – test product on a small inconspicuous area first to gauge cure time.